Connecting The Antenna Terminals - Denon AVR-5805CI Operating Instructions Manual

Connecting the antenna terminals

• An F-type FM antenna cable plug can be connected directly.
AM LOOP ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
GROUND
Note to CATV system installer
• This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC which
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.
Direction of broadcasting
station
FM ANTENNA
75 Ω/ohms
COAXIAL
CABLE
FM INDOOR
ANTENNA
(Supplied)
NOTE:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
39
Connecting Other Sources
2 AM loop antenna assembly
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a wall.
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the lever. 2. Insert the
conductor.
Connect to the AM
antenna terminals.
3
Bend in the reverse
direction.
3. Return the
lever.