Denon AVR-5805CI Operating Instructions Manual page 144

Advanced Setup – Part 2
3
CURSOR
Press the
"Test Tone Start", then press the
button to select "Yes".
4 When "Auto" mode is selected:
CURSOR
Press the
-1
the speakers to the same volume.
• The test tones are emitted from each speaker in the
following order, at 4 seconds intervals the first time
and second time around, 2 seconds intervals the
third time around and on:
FL C
SW SLA
When the surround back speaker setting is set to
"1spkr" for "Speaker Configuration", this is set to
"SB".
Example: When the volume is set to –11.5 dB while
the test tone is being produced from the
Front L ch speaker
The volume can be adjusted between –12.0 dB and
+12.0 dB in units of 0.5 dB.
D D or H H button to select
CURSOR
F F or G G button to adjust all
FR SRA SRB
2spkrs
SLB SBL SBR
SB
1spkr
4
When "Manual" mode is selected:
CURSOR
Press the
F F
-2
speaker, then press the
to adjust all the speakers to the same volume.
Example: "Manual" mode is selected.
5
ENTER
Press the
• The "Channel Level" screen reappears.
• To cancel the settings, press the CURSOR F F button to select
"Level Clear" and "Yes" on the "Channel Level" screen,
then make the settings again.
144
D D or H H button to select the
CURSOR
F F or G G button
button to enter the setting.