Setting The Trigger Out - Denon AVR-5805CI Operating Instructions Manual

Setting the Trigger Out

• Four 12 V DC Trigger Outputs on the rear panel can be used
to control other devices with compatible trigger inputs, such
as motorized screens, motorized screen masking, motorized
drapes, and other trigger-controlled devices.
• Set the DC output supplied from the trigger out jacks for the
various input sources to "ON" or "OFF".
1
CURSOR
Press the
"Trigger Out" at the "Option Setup" menu,
ENTER
then press the
• The "Trigger Out" screen appears.
2
CURSOR
Press the
trigger out terminal you want to set, then press
ENTER
the button.
• Switch to the setting screen.
Example: When "Trigger Out 1" is selected
3
CURSOR
Press the
zone (MAIN ZONE, ZONE2, ZONE3 and
ZONE4).
The power supplied from the trigger out terminal turns
on and off when the power for the set zone is turned
on and off.
4
CURSOR
Press the
input source, then press the
button to select "ON" or "OFF".
ON:
When that input source is selected, the power
supplied from the trigger out terminal turns on.
OFF:
When that input source is selected, the power
supplied from the trigger out terminal turns off.
D D or H H button to select
button.
D D or H H button to select the
F F or G G button to select the
D D or H H button to select the
CURSOR F F or G G
5
If "MAIN" was selected at step 3:
CURSOR
Press the
surround mode, then press the
G G button to select "ON" or "OFF".
ON:
If "ON" is selected when an input source set to
"ON" is selected, the power supplied from the
trigger out terminal turns on.
OFF:
If "OFF" is selected when an input source set to
"ON" is selected, the power supplied from the
trigger out terminal turns off.
6
ENTER
Press the
• The "Trigger Out" screen reappears.
Use the same procedure to make the settings for
Trigger Out 2, 3, 4.
7
CURSOR
Press the
"Exit", then press the
• The "Option Setup" menu reappears.
When "Default Yes" is selected, then press the
CURSOR F F button to reset to the default values.
135
Advanced Setup – Part 1
D D or H H button to select the
CURSOR
button.
D D or H H button to select
ENTER
button.
F F or