Settings The Thx Audio Setup - Denon AVR-5805CI Operating Instructions Manual

2
CURSOR
Press the
surround mode, then press the
G G button to select the surround speaker.
A:
When surround speakers A is used.
B:
When surround speakers B is used.
A + B:
When both surround speakers A and B are used.
3
ENTER
Press the
• The "Speaker Setup" menu reappears.
• For the "WIDE SCREEN" and "9CH STEREO" DSP
simulation modes, the surround speakers can be set
separately.
• See page 105 for the selection of the surround speakers
when the "ANALOG" mode is selected at "EXT. IN Setup".

Settings the THX Audio Setup

2
Settings for using a THX Ultra2 compatible
subwoofer
• Make these settings when "Yes" is selected for the
subwoofer in the "Speaker Configuration" settings.
This option is not available when "No" is selected (
page 140, 141).
1
CURSOR
Press the
"THX Audio Setup" at the "Speaker Setup"
menu, then press the
• The "THX Audio Setup" screen appears.
D D or H H button to select the
CURSOR
button to enter the setting.
D D or H H button to select
ENTER
button.
2
Press the
F F or
"Boundary Gain Compensation", then press
ENTER
the
3
Press the
a THX Ultra2 compatible subwoofer or
subwoofer that frequency response extends to
20 Hz, select "Yes". Otherwise select "No".
When "Yes" is selected:
"Boundary Gain Compensation" can be selected and
the compensation set to "OFF".
If the bass sound seems too strong:
Set "Boundary Gain Compensation" to "ON". This
activates a filter that gently reduces very deep bass
below 55 Hz to provide the flattest overall deep bass
response. Select "ON" or "OFF" according to how
strong you prefer the deep bass response to be.
4
Press the
• The "THX Audio Setup" screen reappears.
147
Advanced Setup – Part 2
CURSOR D D or H H button to select
button.
CURSOR F F or G G button, when using
ENTER
button.