Selecting The Play Mode (Direct/Stereo); Selecting The Dolby Digital And Dts Surround Mode; (Only With Digital Input) - Denon AVR-487 Operating Instructions Manual

ENGLISH
Basic Operation
INPUT MODE STATUS
SURROUND PARAMETER
ENTER
[DIRECT/STEREO]
ENTER
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Selecting the play mode (DIRECT/STEREO)

F G, ENTER
The AVR-487 is equipped with two 2-channel playback modes
exclusively for music. Select the mode to suit your tastes.
¢ DIRECT mode
This mode is for playing with high quality sound. The audio signals are
transmitted directly, without passing through the tone circuits, etc.
[DIRECT/STEREO]
Press
D H
¢ STEREO mode
Use this mode to adjust the tone and achieve the desired sound.
STATUS
D H F G
[DIRECT/STEREO]
Press
[STANDARD]
SURROUND
PARAMETER
INPUT MODE
D H F G
to select "DIRECT".
DIRECT STEREO
to select "STEREO".
23
ENGLISH
Selecting the Dolby Digital and DTS Surround
mode (only with digital input)
1
Select an input source for which digital (COAXIAL or
OPTICAL) is set ( page 19).
2
INPUT MODE
Press to select "AUTO".
3
[STANDARD]
Press to select "STANDARD (Dolby/DTS
Surround)".
4
Play a program source with the
• " " or " " lights, depending on the source.
5
SURROUND PARAMETER
Press .
6
D D H H
Press to select the item, then press
The parameter switches as shown below each time the button is
pressed.
CINEMA EQ D.COMP.
TONE DEFEAT
DEFAULT
If you do want the bass and treble to be adjusted, turn off the tone
defeat mode.
CINEMA EQ.:
Use this if movie dialogues sound harsh to lower the treble sound.
Effective source mode
II
Dolby Pro Logic / Dolby Pro Logic / Dolby Digital /
DTS Surround / DTS NEO:6 / NEURAL SURROUND
Basic Operation
, mark.
F F G G
to set.
LFE