Setting The Video Convert Mode; Setting The Component In Assignment - Denon AVR-5805CI Operating Instructions Manual

Advanced Setup – Part 1
7
ENTER
Press the
• The "Video Setup" menu reappears.
• Audio signals input from the analog and digital terminals are
not output to the TV.
• With HDMI, the video and audio signals are transferred
simultaneously. When HDMI is assigned to an input source,
the digital audio input assignment switches to HDMI along
with the video input.
When this setting is made for input sources to which a digital
audio input (DENON LINK, IEEE1394 etc.) is previously
assigned, the digital audio assignment is set to HDMI.
In this case, reassign the digital input using the procedure
described at "Digital In Assign" (
"IEEE1394 Assign" (

Setting the Component In Assignment

• This assigns the component (color difference) video input
terminals for the different input sources.
1
CURSOR
Press the
"Component In Assign" at the "Video Setup"
menu, then press the
• The "Component In Assign" screen appears.
2
CURSOR
Press the
input source, then press the
button to select the component video input
terminal.
Select from among 1-RCA to 5-RCA and 6-BNC.
If the same component video input terminal is
selected, the setting for the input source that was
previously assigned switches to "NONE".
When "Default Yes" is selected, then press the
CURSOR F F button to reset to the default values.
3
ENTER
Press the
• The "Video Setup" menu reappears.
button to enter the setting.
page 104) and
page 107).
D D or H H button to select
ENTER
button.
D D or H H button to select the
CURSOR F F or G G
button to enter the setting.

Setting the Video Convert Mode

• This sets whether or not to use the video conversion
function.
1
CURSOR
Press the
"Video Convert Mode" at the "Video Setup"
menu, then press the
• The "Video Convert Mode" screen appears.
2
CURSOR
Press the
input source, then press the
button to select "ON" or "OFF".
ON:
When there are multiple input signals, the input
signals are detected and the input signal to be
output from the video monitor output terminal is
selected automatically in the following order:
component video, S-Video, composite video.
OFF:
The convert function does not operate.
In such cases, the input device's cable type must
be the same as the type of cable connected to the
AVR-5805CI's monitor output terminal (video, S-
Video or component video).
3
ENTER
Press the
• The "Video Setup" menu reappears.
• Down-converting from the component video signal to the S-
Video and composite video signal is possible only when the
resolution of a component video signal is 480i / 576i.
• When a non-standard video signal from a game machine or
some other source is input, the video conversion function
might not operate. If this happens, please set the conversion
mode to "OFF".
• When the video conversion function has been used,
information such as that of text broadcasts which has been
added to the video signal might not be output. If this
happens, please set the conversion mode to "OFF".
112
D D or H H button to select
ENTER
button.
D D or H H button to select the
CURSOR F F or G G
button to enter the setting.