Table 7-6. Btx Reference Thermal Solution Providers - Intel E6700 - Core 2 Duo Dual-Core Processor Design Manual

Note: These vendors and devices are listed by Intel as a convenience to Intel's general
customer base, but Intel does not make any representations or warranties whatsoever
regarding quality, reliability, functionality, or compatibility of these devices. This list
and/or these devices may be subject to change without notice.
Table 7–6. BTX Reference Thermal Solution Providers
Supplier
Mitac International
Corp
AVC*
(ASIA Vital
Components Co., Ltd)
AVC*
(ASIA Vital
Components Co., Ltd)
TBD
CCI
(Chaun-Choung
Technology Corp.)
AVC
(ASIA Vital
Components Co., Ltd)
NOTES:
1.
2.
3.
4.
Note: These vendors/devices are listed by Intel as a convenience to Intel's general customer
base, but Intel does not make any representations or warranties whatsoever regarding
quality, reliability, functionality, or compatibility of these devices. This list and/or
these devices may be subject to change without notice.
126
Part Description
Support and
Retention Module
Type I Thermal
Module Fan
Assembly
2004
Type II Thermal
Module Fan
Assembly
2004
Type II Thermal
Module Fan
Assembly
65W 2006
Extrusion
Fan and Duct
Part numbers were not available at the time of release of this document. Contact the
company for part number identification prior to the next revision of this document.
The user should note that for the 2004 Type I Intel reference Thermal Module
Assembly: also meets 2005 Performance (130W) and Mainstream (84W) as well as the
2004 Performance (115W).
The user should note that for the 2004 Type II Intel reference Thermal Module
Assembly: meets the requirements for 115W 2004 Performance 775_VR_CONFIG_04
and 95W 2005 Mainstream 775_VR_CONFIG_05.
The Type II TMA designed for 65W 2006 FMB has been optimized for acoustics and
cost. It is not interchangeable with the 95W Type II reference design.
Intel® Enabled Reference Solution Information
Part
Contact
Number
_ Michael Tsai
DB09238B
David Chao
120084
DB07038B
David Chao
12UP001
TBD TBD
Harry Lin
TBD
Monica Chih
TBD David Chao
§
Thermal and Mechanical Design Guidelines
Phone Notes
886-3-328-
1
9000 Ext.6545
+886-2-
22996930 2
Extension: 619
+886-2-
22996930 3
Extension: 619
TBD 4
714-739-5797
+886-2-
29952666
Extension 131
+886-2-
22996930
Extension: 619