Figure 7-20. Position Bead On The Groove Step; Figure 7-21. Detailed Thermocouple Bead Placement - Intel E6700 - Core 2 Duo Dual-Core Processor Design Manual

11. While still at the microscope, press the wire down about 6mm [0.125"] from the
thermocouple bead using the tweezers or your finger. Place a piece of Kapton*
tape to hold the wire inside the groove (Figure 7-20). Refer to Figure 7-21 for
detailed bead placement.

Figure 7-20. Position Bead on the Groove Step

Kapton*

Figure 7-21. Detailed Thermocouple Bead Placement

92
tape
TC Wire with Insulation
IHS with Groove
Case Temperature Reference Metrology
TC Bead
Thermal and Mechanical Design Guidelines
Wire section
into the
groove to
prepare for
final bead
placement