References; Definition Of Terms - Intel BX80571E7400 - Core 2 Duo 2.8 GHz Processor Manuallines

Thermal and mechanical design guidelines
Table of Contents

Advertisement

Introduction
1.2

References

Material and concepts available in the following documents may be beneficial when
reading this document.
Material and concepts available in the following documents may be beneficial when
reading this document.
Intel
®
Core
Datasheet
®
Intel
Pentium
Datasheet
LGA775 Socket Mechanical Design Guide
uATX SFF Design Guidance
Fan Specification for 4-wire PWM Controlled Fans
ATX Thermal Design Suggestions
microATX Thermal Design Suggestions
Balanced Technology Extended (BTX) System Design
Guide
Thermally Advantaged Chassis Design Guide
1.3

Definition of Terms

Term
T
T
T
T
T
C-MAX
Ψ
Ψ
Thermal and Mechanical Design Guidelines
Document
2 Duo Processor E8000 and E7000 Series
®
Dual-Core Processor E5000 Series
The measured ambient temperature locally surrounding the processor. The
ambient temperature should be measured just upstream of a passive
A
heatsink or at the fan inlet for an active heatsink.
The case temperature of the processor, measured at the geometric center
of the topside of the IHS.
C
The ambient air temperature external to a system chassis. This
temperature is usually measured at the chassis air inlets.
E
Heatsink temperature measured on the underside of the heatsink base, at
a location corresponding to
S
The maximum case temperature as specified in a component specification.
Case-to-ambient thermal characterization parameter (psi). A measure of
thermal solution performance using total package power. Defined as
(T
– T
) / Total Package Power.
CA
C
A
Note: Heat source must be specified for
Case-to-sink thermal characterization parameter. A measure of thermal
interface material performance using total package power. Defined as
(T
– T
) / Total Package Power.
CS
C
S
Note: Heat source must be specified for
www.intel.com/design/processor/d
atashts/318732.htm
http://download.intel.com/design/p
rocessor/datashts/320467.pdf
http://developer.intel.com/design/P
entium4/guides/302666.htm
http://www.formfactors.org/
http://www.formfactors.org/
http://www.formfactors.org/
http://www.formfactors.org/
http://www.formfactors.org/
http://www.intel.com/go/chassis/
Description
T
.
C
Ψ
measurements.
Ψ
measurements.
Location
13

Advertisement

Table of Contents
loading

Table of Contents