Figure 7-24. Applying Flux To The Thermocouple Bead; Figure 7-25. Cutting Solder - Intel BX80571E7400 - Core 2 Duo 2.8 GHz Processor Manuallines

Thermal and mechanical design guidelines

Table of Contents

Figure 7-24. Applying Flux to the Thermocouple Bead

15. Cut two small pieces of solder 1/16 inch (0.065 inch / 1.5 mm) from the roll using

tweezers to hold the solder while cutting with a fine blade (Figure 7-25).

16. Place the two pieces of solder in parallel, directly over the thermocouple bead

(Figure 7-26).

Case Temperature Reference Metrology

Thermal and Mechanical Design Guidelines

Table of Contents

Do you have a question about the BX80571E7400 - Core 2 Duo 2.8 GHz Processor and is the answer not in the manual?