Table of Contents
Advertisement
Operator Print Tests
This procedure describes how to run the
operator print tests. Although you may run
these tests at any time, to obtain predictable
results, all tests should be run while no data
is in the print buffer. The following tests may
be run: Printer Demonstration, Print Error
Log, Ripple Print, All Es, All Hs, All Es & FF
and Underlines. If you are using the Ethernet
Interface, you may also print a test page.
In the following procedure, printing the error
log is shown as an example.
Press Stop to place the printer in the
NOT READY state.
2
Press Scroll
PROGRAM state.
3
Press Menu to access the OPERATOR
MENU.
4
Press Scroll
PRINT TESTS menu.
5
Press Enter to enter this menu.
6
Press Scroll
you want to run.
68
+ Scroll ± to unlock the
to the OPERATOR
until you reach the test
NOT READY
OPERATOR MENU
UNLOCKED
OPERATOR MENU
PRINTER CONTROL
OPERATOR MENU
OPERATOR PRINT TESTS
OPERATOR PRINT TESTS
PRINTER DEMONSTRATION*
OPERATOR PRINT TESTS
PRINT ERROR LOG
Operator' s Guide
Hide quick links:
Advertisement
Table of Contents
