IBM 6400 - Model 008 B/W Line-matrix Printer Operator's Manual page 58

unloading the power stacker
Removing Paper from the Power
Stacker Only:
Open the rear cabinet door.
2
Using the rear control panel, press ON
LINE to place the printer in NOT READY
state.
3
Press STACKER UP and wait for the
stacker to reach the top of its travel.
4
Open the printer cover.
5
Tear the paper off at the first perforation
above the tractors and let the paper fall
through the power stacker throat.
6
From the rear of the printer, making sure
the paper lies with its natural folds, lay
the paper on top of the paper stack.
7
Remove the paper from the rear of the
printer.
8
Close the rear cabinet door and the
cover.
44 Operator' s Guide