IBM 6400 - Model 008 B/W Line-matrix Printer Operator's Manual page 66

canceling a print job
For printers using a twinax interface*:
a The Cancel key is effective in
READY or NOT READY state.
b Press Cancel to clear the printer
buffer. This sends a cancel status
message to the host, which clears
the print job. (When pressed,
"059 CANCEL PRINT ACTIVE"
is displayed.)
Or you may use the host system to
cancel a print job.
For printers using a serial or parallel
interface:
a Press Stop to place the printer in
NOT READY state.
b From the host system, stop the
print job.
If the print job is not stopped from the host
system before pressing the Cancel key , the
print job will continue when the printer
returns to READY state.
c Press Cancel. (When pressed,
"069 DATA CLEARED" is displayed.)
d Set the top-of-form as described on
page 45.
*To cancel a print job with the Multi-Platform
Interface Coax/Twinax feature, see the
Coax/Twinax Multi-Platform Interface
Feature Operation Guide .
52
note
Operator' s Guide