Loading Paper - IBM 6400 - Model 008 B/W Line-matrix Printer Operator's Manual

Loading Paper

This procedure shows you how to load paper
into an empty printer, change the paper
supply to a different size, or load paper after
clearing a paper jam.
To reload the paper after an "END OF
FORMS" fault message, refer to page 33.
Press Stop to place the printer in
NOT READY state.
2
Open the printer cover.
3
If necessary, unload the current paper
(page 41), then continue with step 7 of
this procedure. If not, continue with
step 4.
4
Raise the forms thickness lever
as far as it will go.
5
Open both tractor doors.
6
Press any key on the operator panel
except Form Feed to silence the alarm.
Pressing any key on the operator panel will
silence the alarm. Pressing the Form Feed
key will silence the alarm and cause the
paper to move. The top–of–form setting will
be lost.
26
note
note
Tractor
Door
Forms
Thickness
Lever
Operator' s Guide