reloading paper
3
Pull the paper above and behind
the ribbon mask. The ribbon
mask location is shown on the
ribbon path diagram.
4
Load the paper on the left
tractor and close the tractor
door.
5
Normally, you should not need
to adjust the position of the left
tractor.
If adjustment is necessary,
unlock the left tractor. Slide the
tractor until it is directly to the
left of the number "1" on the
paper scale and lock it. You
can also use the paper scale to
count columns.
38
Tractor Door
Ribbon Path
Diagram
Paper Scale
Paper
Operator' s Guide