Line Feed - IBM 6400 - Model 008 B/W Line-matrix Printer Operator's Manual

using the operator panel

Line Feed

This key operates only in NOT
READY state. Press Stop to place
the printer in the NOT READY state.
(See page 14.)
In NOT READY state, press to
move the paper up one line, as
defined by the existing active line
spacing. Line Feed will repeat if it
is held down.
If there is any data in the buffer, it
will print, then the paper will move
up one line.
The data that prints is all of the data
contained in the printer buffer. The data not
in the print buffer is not affected.
View
In NOT READY state, press view to
move the current print position up to
the tractor area for viewing. This
allows you to check the print location.
If there is any data left in the buffer,
the data will be printed, then the
paper will move up for viewing.
Press View a second time to return
the paper back to the position when
the View key was pressed.
Pressing Star t instead of pressing View a
second time performs the same function as
pressing View a second time and puts the
printer in READY state.
Pressing Stop instead of pressing View a
second time moves the paper back to its
original print position and puts the printer in
NOT READY state.
12
not
not
Line
Feed
View
Operator' s Guide