IBM 6400 - Model 008 B/W Line-matrix Printer Operator's Manual page 71

7
Press Enter to access the save options.
8
Press Scroll
custom set you want to save displays.
Do not power off the printer while save
is in progress because you might lose
your configuration.
9
Press Enter to select the custom set.
An asterisk (*) appears next to the
selected set in the display.
1
Press Scroll
PROGRAM state.
11
Press Start to exit the menu and place
the printer in the READY state.
If the custom set you choose to save to is
already defined and PROTECT CUST OM
SETS is enabled, the following error
message is displayed, "043 Custom Set
Already Exists / Delete First."
Operator' s Guide
repeatedly until the
important
+ Scroll ± to lock the
note
saving configurations
SAVE CURRENT VALUES
CUSTOM SET 1
SAVE CURRENT VALUES
CUSTOM SET 2
SAVE CURRENT VALUES
CUSTOM SET 2*
OPERATOR MENU
LOCKED
SAVE CURRENT VALUES
CUSTOM SET 2*
READY
57