IBM 6400 - Model 008 B/W Line-matrix Printer Operator's Manual page 29

Cancel
Use the Cancel key carefully to avoid
canceling a job accidentally.
1) Stops printer tests in progress.
2) Cancels a print job. Operation depends
on the printer interface.
a Coax Interface (non–SCS mode)*:
The Cancel key is not effective and
the "009 INVALID KEY" error
message is displayed.
With a Coax Interface, pressing the Cancel key a
second time stops the previous cancel.
b Coax Interface (SCS mode)*: Effective in
NOT READY state but the action will occur
in the READY state only. When pressed,
"059 CANCEL PRINT ACTIVE" is
displayed.
c Twinax Interface*: Effective in READY and
NOT READY state. When pressed, "059
CANCEL PRINT ACTIVE" is displayed.
d Serial/Parallel Interface: It is
recommended that you stop the print job
from the host system before pressing
Cancel. Effective in NOT READY state.
When pressed, "069 DATA CLEARED" is
displayed.)
For more information, see page 51,
"Canceling a Print Job."
The Cancel key is not active during View
and Eject/Restore operations.
*To cancel a print job with the Multi-Platform
Interface Coax/Twinax feature, see the Coax/Twinax
Multi-Platform Interface Feature Operation Guide .
Operator' s Guide
important
note
note
using the operator panel
Cancel
15