Table of Contents
Advertisement
Loading paper and specialty media
This section shows how to load the standard tray (250-sheet letter-size tray), the multipurpose feeder, and the optional
500-sheet tray which is part of the optional 500-sheet drawer. It also includes information about the standard exit bin.
Loading the standard tray
The printer has two trays to select from: the standard tray (Tray 1), also known as the 250-sheet tray, and the optional
550-sheet tray (Tray 2). Load the paper or specialty media used for the majority of print jobs in Tray 1. Proper paper loading
prevents jams and facilitates trouble-free printing.
Do not remove trays while a job prints or while Busy blinks on the display. Doing so may cause a jam.
1
Grasp the handle and pull the tray out. Remove the tray completely.
2
Squeeze the width guide tabs together as shown, and move the width guide to the side of the tray.
3
Squeeze the length guide tabs together as shown, and slide the length guide to the correct position for the size of
paper being loaded. Notice the size indicators in the window in the bottom of the tray. Use these indicators to help
position the guide. Notice the load lines on the width guide tab: they indicate the maximum height for loading paper.
27
Advertisement
Table of Contents
