Table of Contents
Advertisement
7
Using the Boot Manager
Viewing the Variables and Other System Parameters
printenv
Use the printenv command to view the values of variables currently stored in
the boot manager nonvolatile memory. The command has the following
syntax:
printenv
For example:
BOOTMGR[93]> printenv
Bootmgr Revision: 3.3,base kernel=3.5.1- 06.12.2002-
080000
autoboot: YES
testboot: NO
bootwait: 0
boot-file:
boot-flags:
boot-device:
vendor: Nokia
model: IP
74
Nokia 60s and 100s Installation Guide
Advertisement
Table of Contents
Troubleshooting
