Other Environmental Requirements; Cpe Environmental Requirements; Storage; Transportation - Nokia 7368 Product Manual

ETSI environmental and CRoHS guidelines

3.3 Other environmental requirements

3.3.1
3.3.2
3.3.3
3.3.4
3.3.5
26
Observe the following environmental requirements when handling the P-OLT or CPE
equipment.

CPE environmental requirements

See the CPE technical specification documentation for more information about
temperature ranges.

Storage

According to ETS 300-019-1-1 - Class 1.1, storage of OLT equipment must be in
Class 1.1, weather-protected, temperature-controlled locations.

Transportation

According to EN 300-019-1-2 - Class 2.3, transportation of the OLT equipment must
be in packed, public transportation with no rain on packing allowed.

Stationary use

According to EN 300-019-1-3 - Class 3.1/3.2/3.E, stationary use of OLT equipment
must be in a temperature-controlled location, with no rain allowed, and with no
condensation allowed.

Thermal limitations

When the OLT is installed in the CO or CEV, install air filters on the P-OLT. The
thermal limitations for OLT operation in a CO or CEV are:
•
operating temperature: 5C to 40C (41F to 104F)
•
short-term temperature: –5C to 50C (23F to 122F)
•
operating relative humidity: 5% to 85%
•
short-term relative humidity: 5% to 95%, but not to exceed 0.024 kg of water/kg
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Issue: 01