Table of Contents
Advertisement
5
Connecting PMC Network
Interface Cards
This chapter describes the PMC NICs available for the 60s and 100s
appliances and explains how to connect those NICs to your network. The
following NICs are covered:
For instructions on adding or replacing interface cards, see
"Installing and Replacing Network Interface Cards"
Caution
Protect your 60s or 100s appliance and other electronic equipment
from electrostatic discharge (ESD) damage by making sure you are
properly grounded before you touch any electronic component.
Dual-Port 10/100 Ethernet Interface, PMC
Every 60s and 100s appliance has four built-in dual-mode 10-Mbps and 100-
Mbps ports. Additionally, the appliance supports Nokia-approved, dual-port
UTP5 dual-mode 10-Mbps and 100-Mbps Ethernet NICs.
When you purchase an Ethernet NIC with your 60s and 100s appliance, the
NIC is installed before the appliance is delivered to you. For information on
Nokia 60s and 100s Installation Guide
Dual-Port 10/100 Ethernet Interface, PMC
Chapter 4,
47
Advertisement
Table of Contents
Troubleshooting
