Nokia IP350 - Security Appliance Installation Manual page 75

sysinfo
Use the
memory size, and so forth. The command has the following syntax:
For example:
CPU 0: 700 MHz Pentium-III w ATC
Memory: 268435456 (256M bytes)
Disk Devices:
Network Interfaces:
loop0:
soverf0:
stof0:
tun0:
eth1:
eth2:
eth3:
eth4:
Nokia 60s and 100s Installation Guide
command to view system information such as CPU speed,
sysinfo
sysinfo
IO port 0x1f0 wdc0: unit 0 (wd0): <IBM-DJSA-205>
5000MB (9767520 sectors), 608 cyls, 255 heads,
63 S/T, 512 B/S
flags=10b<UP,LINK,LOOPBACK,PRESENT>
flags=2923<UP,LINK,MULTICAST,PRESENT,IPV6ONLY>
flags=2903<UP,LINK,PRESENT,IPV6ONLY>
flags=107<UP,LINK,POINTOPOINT,PRESENT>
flags=131<LINK,BROADCAST,MULTICAST,PRESENT>
ether 0:20:30:0:11:4 speed 10M full duplex
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:20:30:0:11:5 speed 10M full duplex
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:20:30:0:11:6 speed 10M full duplex
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:20:30:0:11:7 speed 10M full duplex
Variables
75