1
Overview
Ethernet Management Ports
The Ethernet management ports are located on the front of the appliance.
Figure 3
Note
The Ethernet management ports are intended for management purposes.
These ports do not provide the same performance as Ethernet cards in
the PMC slots.
Figure 3 Ethernet Management Ports Details
Caution
Cables that connect to the Ethernet ports must be IEEE 802.3
compliant to prevent potential data loss.
The 60s and 100s appliances include two PMC (PCI mezzanine cards)
expansion slots for Nokia supported network interface cards. For information
about using supported LAN cards, see
The 60s and 100s appliances also include a PCMCIA slot that supports
PCMCIA modems. See
20
shows the layout of the Ethernet management ports and link LEDs.
Activity LED (yellow)
Link LED (green)
"Installing a PCMCIA Modem"
RJ-45 connectors
00120
page 47
.
on page 52.
Nokia 60s and 100s Installation Guide