1
Overview
The location and meaning of the status LEDs for network interface cards are
explained in
For information on the built-in Ethernet interface LEDs, see
Management Ports"
For information on the Dual port Ethernet card LEDs, see
100 Ethernet Interface, PMC"
Site Requirements
Before you install a Nokia 60s or Nokia 100s appliance, ensure that your
computer room or wiring closet conforms to the environmental specifications
listed in
Warning
Hazardous radiation exposure can occur if you use controls, make
performance adjustments, or follow procedures that are not described in
this document.
Warning
An explosion can occur if the battery is incorrectly placed. Replace only
with the same or equivalent type battery recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
Warning
To reduce the risk of fire, electric shock, and injury when you use
telephone equipment, follow basic safety precautions. Do not use the
product near water.
24
Chapter 5, "Connecting PMC Network Interface Cards."
on page 20.
Appendix A, "Technical Specifications."
on page 47.
Nokia 60s and 100s Installation Guide
"Ethernet
"Dual-Port 10/