Replacing Or Upgrading Memory - Nokia IP350 - Security Appliance Installation Manual

9. Tighten the thumbscrews that hold the chassis assembly.
The system automatically restarts when the chassis assembly clicks into place.

Replacing or Upgrading Memory

The Nokia 60s and 100s appliances have two dual inline memory-module
(DIMM) sockets. This section explains how to upgrade or replace the memory
for either platform by using a Nokia-approved memory upgrade kit.
Caution
Nokia 60s and 100s Installation Guide
The 60s comes with 256 MB of memory in one DIMM and can be
upgraded to 512 MB by adding a second 256 MB DIMM.
The 60s appliance cannot function with more than 512 MB of
memory. If more than 512 MB of memory is installed in a 60s, the
system displays a warning message and shuts down.
The 100s appliance comes with 256 MB of memory in one DIMM and
can be upgraded to 512 MB by adding a second 256 MB DIMM, or
upgraded to 1 GB by replacing the 256 MB DIMM with two (2) 512 MB
DIMMs.
Chassis assembly thumbscrews
Replacing or Upgrading Memory
60s
00487
57