7.5 Viewing Overview Information - Nokia Beacon G6 Product Manual

Configure a Beacon G6
GUI overview
Viewing overview information
The default gateway IP address must be same as the one printed on the device label. You can
connect to this IP address using your web browser after connecting your PC to one of Ethernet
ports of the Beacon. The static IP address of your PC must be in the same default gateway
subnet as the Beacon.
2
If you forget the current username and password, press the Reset button for 10 seconds to
reset the values to the default username and password provided at startup.
Pressing the Reset button for less than 10 seconds reboots the device.
Pressing the Reset button for 10 seconds resets the device to the factory defaults, except for
the LOID and SLID.
Pressing the Reset button for 10 seconds resets the device to the factory defaults.
Enter your username and password in the Login page, as shown in
(p. 62).
The superadmin account is meant for the operator and is unique per device. Contact your
Nokia representative to obtain the superadmin password for device.
The default end-user account name and the default password for this account are printed on
the device label.
3
Click Sign in. The Device Information page displays.
Note: To help protect the security of your Internet connection, the application displays a
pop-up reminder to change both the Wi-Fi password and the Beacon password.
To increase password security, use a minimum of 10 characters, consisting of a mix of
numbers and upper and lower case letters.
E
ND OF STEPS

7.5 Viewing overview information

1
Click Overview from the left pane. The Overview page displays the following cards.
June 2022
Issue 1
CAUTION
Service Disruption
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA
Beacon G6
Figure 7-1, "Login page"
63