Simrad Transducers - Simrad TRANSDUCER - INSTALLATION GENERIC REV H Installation Manual

Simrad Echo sounder transducers

SIMRAD TRANSDUCERS

40
This chapter presents a list of all the current Simrad transducers.
For each transducer, information is provided to establish:
• the transducer type and frequency
• the opening angle(s)
• the order number for the transducer
• the order number for the transducer cable
• how it is connected to the General Purpose Transceiver (GPT)
unit
This list was correct at the time of writing. However, new
transducers are frequently added to the product range. For an
updated list of all the currently available transducers, refer
to www.simrad.com. Product specifications and installation
documents can be downloaded from the web site.
By means of various hardware and software configurations and
adjustments, the General Purpose Transceiver (GPT) unit is used
with the following echo sounder systems:
• Simrad ES60 fish finding echo sounder
• Simrad EK60 scientific echo sounder
• Kongsberg Maritime's EA 400 hydrographic echo sounder
• Kongsberg Maritime's EA 600 hydrographic echo sounder
Topics
All 12 kHz transducers on page 41
All 18 kHz transducers on page 41
All 27 kHz transducers on page 41
All 38 kHz transducers on page 42
All 50 kHz transducers on page 44
All 70 khz transducers on page 45
All 120 khz transducers on page 46
All 200 kHz transducers on page 47
All 710 kHz transducers on page 49
Related topics
Cable splicing on page 36
851-160164/H