Table of Contents
Advertisement
Simrad ES200-7C
SIMRAD ES200-7C
6
The purpose of this manual is the provide the basic information
required to install the Simrad ES200-7C Split-beam transducer.
Transducer and documents
• Simrad ES200–7C:
• Product specification:
• Documents:
– Outline dimensions:
– Mounting ring:
– Clamping ring:
– Mounting arrangement:
Note
Although drawings are provided to explain the installation
principles, the installation shipyard must provide the final
drawings required to fit the transducer to each individual
vessel. Also, when applicable, the installation shipyard
must have the drawings and installation approved by the
proper maritime authorities. The drawings specific for
the ES200-7C transducer are located in the Drawing file
on page 36.
Technical specifications
Refer to the ES200-7C product specification.
Additional parts provided for installation
The following items can be supplied by Simrad to facilitate
installation:
• Mounting ring:
ES2–204464
• Clamping ring:
ES2–200879
• Transducer cable (for extension):
KSV-203003
855–204465
834-204671
871-204449
871-204451
820-204678
642–078215
307120/B
Advertisement
Table of Contents
