Table of Contents
Advertisement
Simrad ES333-7CD
SIMRAD ES333-7CD
6
The purpose of this manual is the provide the basic information
required to install the Simrad ES333-7CD Split-beam transducer.
Transducer and documents order numbers
• Simrad ES333–7CD:
• Product specification:
• Outline dimensions:
• Mounting ring:
871-204449
• Clamping ring:
871-204451
Note
Note that although drawings are provided to explain the
installation principles, the manufacturer of the towed body
must provide the final drawings required to fit the transducer.
Transducer installation
The next chapters in this manual provide general guidelines for
transducer installation. The drawings specific for the ES333-7CD
transducer are located in the Drawing file on page 20.
Technical specifications
Refer to the ES333-7CD product specification.
Additional parts provided for installation
The following items can be supplied by Simrad to facilitate
installation:
• Mounting ring:
ES2–204464
• Clamping ring:
ES2–200879
• Transducer cable (for extension):
Note
This cable is NOT suitable as a tow cable!
• The following parts must (if required) be provided by the
installation shipyard:
– Male bulkhead connector: 8–pin Burton 5500 Series
(www.burtonee.com)
312902
329782
318747
642–078215
329787/A
Advertisement
Table of Contents
