Dual Beam (Wide Or Narrow) Transducer - Simrad TRANSDUCER - INSTALLATION GENERIC REV H Installation Manual

Simrad Echo sounder transducers

Dual beam (wide or narrow) transducer

Transducer cable
Narrow
Yellow/Green
Blue
Brown
Screen
Transducer cable
Wide
Blue
Black
Screen
W802-3
Rev.E
54
This is the termination of the transducer cable from a single
frequency, dual beam transducer to the transducer socket on the
General Purpose Transceiver Unit (GPT). The other end of the
cable is permanently fixed to the transducer.
Note
Always check the transmit power if wide beam is selected in
order not to exceed the power capacity on the transducer.
Junction Box (1:1)
(Optional)
Junction Box (1:1)
(Optional)
Single frequency, dual beam (wide or narrow) termination
If you need to splice the transducer cable, it is very important to
use the correct cable, and to avoid ground loops. We strongly
recommend the use of a junction box. We also recommend that
you install the transducer cable in a steel conduit.
Related topics
Cable splicing on page 36
Steel conduit on page 37
GPT Transducer
A
N
socket
B
M
C
L
D
K
E J
F H
Connect to plug housing
Connect to plug housing
C
D
C
D
851-160164/H