Table of Contents
Advertisement
Simrad ES38B
SIMRAD ES38B
6
The purpose of this manual is the provide the basic information
required to install the Simrad ES38B Split-beam transducer.
Transducer and documents
• Simrad ES38B:
KSV-074531
• Data sheet:
164247
• Drawings:
– Outline dimensions:
– Mounting ring:
– Steel blister:
111–082733
– Mounting procedure:
– Mounting arrangement:
Note
Although drawings are provided to explain the installation
principles, the installation shipyard must provide the final
drawings required to fit the transducer to each individual
vessel. Also, when applicable, the installation shipyard must
have the drawings and installation approved by the proper
maritime authorities. The drawings specific for the ES38B
transducer are located in the Drawing file on page 29.
Technical specifications
Refer to the Simrad ES38B data sheet. You can read and/or
download the data sheet on http://www.simrad.com.
Additional parts provided for installation
The following items can be supplied by Simrad to facilitate
installation. The items must be ordered separately.
• Mounting ring:
499–074076
• Support beam:
099–206575
• Steel tank:
599–133807
• Arctic tank:
KSV-065087
• Transducer cable (for extension):
830–074647
499–074076
820–088759
820–074544
642-075072
338462/B
Advertisement
Table of Contents
