Table of Contents
Advertisement
Simrad ES38-18/200-18C
Simrad ES38-18/200-18C
The Simrad ES38-18/200-18C is a "two-in-one" combi transducer designed for fishery and
fishery research applications. It contains a 38 kHz split beam transducer as well as a 200
kHz single beam transducer. Both offer 18 degrees beamwidth at their nominal operational
frequencies. The split beam transducer is designed with three separate segments.
The transducer is streamlined, and designed
to be mounted under the hull. Flush mounting
is not recommended.
A fairing must be designed to fit between
the top of the transducer surface and the hull.
The fairing shall offer the necessary inclination
angle, and provide space for the cable service
loop.
Note
The fairing must cover the entire top surface of the transducer house. Supporting only at
each end of the transducer may cause damage to the transducer if subjected to slamming.
The transducer housing is provided with two holes for mounting bolts. These shall penetrate
the transducer fasten it to the fairing.
The transducer cable penetrates the hull using a stuffing tube and a cable gland.
Topics
Order information, page 8
Technical specifications, page 8
Support information, page 10
7
404776/A
Advertisement
Table of Contents
