Sidescan Transducer - Simrad TRANSDUCER - INSTALLATION GENERIC REV H Installation Manual

Sidescan transducer

Transducer cable
Port side
Screen
Transducer cable
Starboard side
Screen
W802-7
Rev.D
851-160164/H
This is the termination of the transducer cable from two sidescan
transducers (port and starboard) to the socket on the General
Purpose Transceiver Unit (GPT). The other end of each cable
is permanently fixed to the transducers. If only one sidescan
transducer is used, connect is as a port side unit to terminals C
and D on the GPT socket.
Junction Box (1:1)
(Optional)
Junction Box (1:1)
(Optional)
Dual frequency sidescan termination
If you need to splice the transducer cable, it is very important to
use the correct cable, and to avoid ground loops. We strongly
recommend the use of a junction box. We also recommend that
you install the transducer cable in a steel conduit.
Related topics
Cable splicing on page 36
Steel conduit on page 37
GPT transducer terminations
GPT Transducer
A
N
socket
B
M
C
L
D
K
E J
F H
Connect to plug housing
Connect to plug housing
C
D
H
J
59