Simrad 38/200 Combi W - Simrad 38-200 COMBI W - INSTALLATION REV D Installation Manual

Simrad 38/200 Combi W

SIMRAD 38/200 COMBI W
6
The purpose of this manual is the provide the basic information
required to install the Simrad 38/200 Combi W Dual frequency
transducer.
Transducer and documents
• Simrad 38/200 Combi W:
• Data sheet:
165019
• Drawings:
– Outline dimensions:
– Mounting ring:
– Clamping ring:
– Mounting arrangement:
Note
Although drawings are provided to explain the installation
principles, the installation shipyard must provide the final
drawings required to fit the transducer to each individual
vessel. Also, when applicable, the installation shipyard must
have the drawings and installation approved by the proper
maritime authorities. The drawings specific for the 38/200
Combi W transducer are located in the Drawing file on
page 33.
Technical specifications
Refer to the Simrad 38/200 Combi W data sheet. You can read
and/or download the data sheet on http://www.simrad.com.
Additional parts provided for installation
The following items can be supplied by Simrad to facilitate
installation. The items must be ordered separately.
• Mounting ring:
ES1-208847
• Clamping ring:
ES1–203672
• Transducer cable (for extension):
KSV-208845
834-208889
499-208846
820-204677
820-204678
642-078215
164986/D