Simrad 38-7 - Simrad 38-7 - INSTALLATION REV D Installation Manual

Simrad 38-7

SIMRAD 38-7
6
The purpose of this manual is the provide the basic information
required to install the Simrad 38-7 Single beam transducer.
Transducer and documents
• Simrad 38–7:
KSV-082776
• Data sheet:
164017
• Drawings:
– Outline dimensions:
– Mounting ring:
– Steel blister:
111–082733
– Mounting procedure:
– Mounting arrangement:
Note
Although drawings are provided to explain the installation
principles, the installation shipyard must provide the final
drawings required to fit the transducer to each individual
vessel. Also, when applicable, the installation shipyard must
have the drawings and installation approved by the proper
maritime authorities. The drawings specific for the 38-7
transducer are located in the Drawing file on page 29.
Technical specifications
Refer to the Simrad 38-7 data sheet. You can read and/or
download the data sheet on http://www.simrad.com.
Additional parts provided for installation
The following items can be supplied by Simrad to facilitate
installation. The items must be ordered separately.
• Mounting ring:
499–074076
• Support beam:
099–206575
• Steel tank:
599–133807
• Arctic tank:
KSV-065087
• Transducer cable (for extension):
830–074647
499–074076
820–088759
820–074544
642-016604
130003/D