Introduction To Options; A.1.1 Options - Xerox DocuColor DocuColor 4 Setup Manual

A.1
The following options are available for use with this printer/copier. Contact
your supplier to order these options.
If Options other than those recommended are used, normal functioning of the
printer/copier cannot be guaranteed.
A.1.1 Options
Additional memory (Code KG1,KG2)
Installs in the printer/copier to increase
memory capacity. General specifications are
as follows.
Module type: 168 pin SDRAM DIMM
Capacity: 32 Mbyte (KG1), 64Mbyte (KG2)
Refer to the Administrator Guide "B.3 Install-
ing Additional Memory".
Special A3 Oversized Paper Tray
A
(Code KF2)
This tray is used by installing it instead of
the 250-sheet Universal Paper Tray that is pro-
vided with the printer/copier. It has a capac-
ity of up to 250 sheets of A3 oversize Size
paper (330 mm W 457 mm L).
Refer to "A.4 Installing the Paper Tray" for
installation.
250 Sheet Universal Paper Tray
(Code KF3)
This tray is identical to the 250-sheet Uni-
versal Paper tray that is provided with the
printer. The tray can also be purchased as a
separate option.
Refer to "A.4 Installing the Paper Tray" for
installation.
126

Introduction to Options