Xerox DocuColor DocuColor 4 Setup Manual page 20

When moving the machine, be sure to unplug the power cord from the outlet. If
the machine is moved with the power cord connected, it can cause damage to
the cord which could result in a fire or shock hazard.
When moving the machine, do not tilt it more than indicated below. If tilted
excessively, the machine may fall over and cause injuries.
n
The machine is capable of operating normally within the following recommended
environmental limits.
Temperature range 41 - 86.9
Humidity range 15 - 85% (no condensation)
Humidity should be 48% or below at 86.9
or below at 85% humidity.
Sudden temperature fluctuations can affect copy quality. Rapid heating of a
cold room can cause condensation inside the machine, directly interfering
with image transfer.
n
Do not expose the machine to direct sunlight. Exposure to direct sunlight can
adversely affect the machine's performance.
n
Do not allow the machine to tilt more than 5mm front to back and more than 10
mm left to right. If tilted excessively, consumables may spill and cause ma-
chine damage.
n
Before moving the machine, remove the DocuColor Copy / Print Cartridge and
Dry Ink Waste Container, and do not re-use, as these could cause damage
from spilled Dry Ink.
xviii
Other Precautions
F
º
F, and temperature should be 82.4
º
F
º