Laser Safety; Maintenance Safety - Xerox DocuColor DocuColor 4 Setup Manual

CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This equipment complies with safety standards. With specific regard to laser safety, the
equipment complies with performance standards for laser products set by government
agencies as a Class 1 laser product. It does not emit hazardous light; the beam is totally
enclosed during all modes of customer operation and maintenance.
When performing various operator functions, you may see laser warning labels. These
labels are for the service mode and are placed on or near panels or shields that require a
tool for removal. These panels are not permanently removed.
Do not attempt any maintenance procedure that is not specifically described
in the documentation supplied with your printer/copier.
Do not use aerosol cleaners. The use of supplies that are not approved
may cause poor performance and could create a dangerous condition.
Use the supplies and cleaning materials only as directed in this manual.
Keep all of these materials out of the reach of children.
Do not remove the covers or guards that are fastened with screws. There
are no parts that you can maintain or service behind these covers.
Do not perform any maintenance procedures unless you have been trained
to do them by a Xerox representative or a procedure is specifically de-
scribed in one of the printer/copier manuals.

Laser Safety

Maintenance Safety

ix