Loading Transparency Sheet In The Multi Purpose Tray (Manual Tray) - Xerox DocuColor DocuColor 4 Setup Manual

2.3 Loading Paper
2.3.3 Loading Transparency Sheet in the Multi Purpose Tray
(Manual Tray)
Transparency sheets can be fed from the Manual Tray.
Full-color Transparency sheet has a front side only. Pay careful attention to
2 the loading direction, as paper jam can result from feeding the sheets up-
side-down.
If Transparency sheet are allowed to accumulate in the output tray, resulting
static electricity may cause a paper jam. Therefore, Transparency sheet should
be removed from the output tray as soon as each one prints.
56
Massage a small stack of Transparency
sheet for printing.
Insert one sheet in the Manual Tray until
it lightly touches the feeding slot. If a full-
color sheet, set the front (printing) side
facing up. If using a removable stripe
transparency, the removable stripe must
be face down. In either case, the edge with
the white stripe should enter the machine
first.
If full-color Transparency sheet is set back-
wards or upside down, it may jam in the printer/
copier.