Transporting The Copier - Xerox DocuColor DocuColor 4 Setup Manual

2.8

Transporting the Copier

Transporting the copier
This section explains how to prepare the scanner for long distance transportation that may bring
impact to the scanner.
Before transporting the scanner, be sure to use the configuration screen to park the scanner module
to prepare for scanner transportation.
2
Always have two persons or more to carry the scanner. This scanner weighs 25.2 kg (53 lbs.).
When lifting the scanner, have the persons facing each other from the right and left sides of the
printer (assuming the part with the control panel is the front) Grasp the parts shown in the illustra-
tion. Never try to lift the scanner while holding any other parts. Otherwise there is a severe risk of
injury if the scanner is dropped.
When lifting the scanner, correct posture is important to prevent hip injuries.
For detailed information on how to transport the printer, refer to the Setup Guide.
Use the following procedure to prepare the scanner for transportation.
(1) Display the configuration screen.
For detailed information on how to display or close the configuration screen, see the "5.1 Displaying
or closing the configuration screen" section of the Administrator Guide.
(2) Press the button to select [17. Transportation Setup...].
(3) Press the [Select] button.
(4) Proceed with power off sequence and transport the printer instructions.
69