Wiring Data; Introduction; About This Mnnual; Organization - Xerox 2510 Service Manual

lntroduction
About This Manual
This manual is part of a documentation
system that includes product training.
This manual contains Service Call Procedures,
Diagnostic Procedures, General Procedures
or Information, Status lndicator Repair
Analysis Procedures, Repair and Adjustment
Procedures and Parts Lists.
This information will help a Service
Representative repair and maintain this
copier.
Organization
This manual is divided into eight sections:
Section 1. Service Call Procedures
This section contains the following
information:
Call Flow Diagram
The Call Flow Diagram is a map of the
procedures to follow on each service call.
Initial Actions
The Initial Actions identify how to collect
the information necessary to proceed
with the service call.
Status Code Entry
Chart
The Status Code Entry Chart shows a list
of status codes, causes, clearance
procedures and instructions on where to
go i f the problem continues.
Maintenance Activities Checklist
This i s a l i s t of the items that have to be
checked based on the type of call to be
performed.
Section
2.
Status Indicator Repair
Analysis Procedures
This section contains the Repair Analysis
Procedures (RAPS) that are necessary to
repair the faults other than image quality
defects. When using a RAP, stop the repairs
whon tho fault
is flxod,
Do not porform the
remaining steps.
Section 3. Ima e Quality Repair
Ana
7
ysis Procedures
This section contains a listing of image
quality defects and samples to assist in
classifying the defects. When the defect has
been classified, a checklist is then used to
repair the cause of the defect. The checklists
nre nrrnngod In tho soquence of most
probable to least probable cause,
Section 4.
Repair/
Adjustment
Procedures
This section contains the repairs and
adjustments for the copier.
Section 5. Parts List
This section contains the detailed Parts Lists
for the copier.
Section 6. General Procedures1
Information
This section contains the Diagnostic
Procedures, Copier Instdlntion procedures,
Copier Specifications, and Supplemental
Tools and Supplies.
Section
7.
Wiring
Data
Thls sectlon has
a
llst
of
the connectors
In
the
copier and shows the location of the
connectors and some of the component
wiring.
Section
8.
Accessoriesl Options
This section contains information about the
accessories and options for the 2510 copier.
251012515
vii
Introduction