Xerox DocuColor DocuColor 4 Setup Manual page 98

2.7 Transporting the Printer
Set a spacer into the location of the dia-
gram, then push the paper tray securely
into the printer/copier.
2
Pull the Multi Purpose Tray Unit out as far
as it will go and set spacers into the loca-
tions of the diagram. Then push the Multi
Bypass Feeder Unit securely back into the
printer/copier.
Press the end of the Multi Purpose Tray's
left connector arm inward using a screw-
driver, etc., then move the arm away from
the printer/copier. Next, disconnect the
right connector arm and remove the tray
entirely from the printer/copier.
Pack the printer/copier carefully so it will
not be damaged, then proceed with trans-
port.
68