Xerox DocuColor DocuColor 4 Setup Manual page 53

1.4 Installation Procedure
Press the metal plate in the paper tray to
compress the spring until it latches down.
1
Move the vertical and horizontal paper
guide clips toward the outer edges. Be par-
ticularly sure to move the vertical paper
guide clip all the way to the left.
Align the four corners of the paper stack,
and insert the stack under the fluke at the
front right side, with the side you want to
print facing down.
Do not use paper that is folded, creased or
heavily curled (curled paper). Do not load more
sheets than the maximum specified. Make sure
the top sheet is under the fluke.
Set the horizontal paper guide clip to the
width of the paper.
If the guide clip is pressed to tightly against
the paper, it may cause a paper jam.
23