Connecting The Power Cord - Xerox DocuColor DocuColor 4 Setup Manual

1.4.10 Connecting the Printer Power Cord
Connect the power cord and turn on power by the following procedure.
Connect the power plug to an outlet with the same rated voltage as the
printer/copier (110-240V), and fused for at least 8 Amperes for 110-240V.
No other devices should be connected to this outlet, as overheating
could cause fire or electric shock. The printer draws 6A at 240V.
The grounding terminal on the power cable should be connected to a
good earth ground to prevent electric shock and fire.
Connect the power plug to an outlet with the same rated voltage as the
printer/copier (115-240V), and fused for at least 15 Amperes for 115V
and 8 Amperes for 220-240V. No other devices should be connected to
this outlet, as overheating could cause fire or electric shock.
1.4 Installation Procedure
First plug the power cord into the connec-
tor on the left side of the printer/copier,
then plug the other end of the cord into
the power outlet.
Item/Enter.
The Print Page menu items follow the Print
Page message.
1
25