Displaying And Changing Webcache Information And Functions; Initializing The Webcache - 3Com SUPERSTACK 3 WEBCACHE 3000 User Manual

Displaying and
Changing
Webcache
Information and
Functions
Initializing the
Webcache

Displaying and Changing Webcache Information and Functions

The Password Recovery feature is enabled.
Enter new value (enable,disable) [enable]:
You can display and change information about the Webcache using the
commands on the System menu. These commands allow you to:
Initialize the Webcache to factory default settings
I
Reboot the Webcache
I
Specify a community string for the Webcache
I
Specify a contact name for the Webcache
I
Specify location details for the Webcache
I
Specify a name for the Webcache
I
Display summary information for the Webcache
I
You can initialize the Webcache using the
Control menu.
To initialize the Webcache:
1 At the Top-level menu, enter:
system control initialize
The following prompt is displayed:
WARNING: This command initializes the system to factory
defaults (excluding IP details) and causes a reset.
Do you wish to continue (yes,no) [no]:
2 Enter if you wish to proceed, or
yes
initialization.
What Happens During an Initialization?
Initializing the Webcache returns it to its default (factory) settings, except
for the current IP and DNS configuration. All cached Web objects and the
DNS cache are cleared. For further information see
Site" on page 65.
You may want to initialize the Webcache if it has previously been used in
a different part of your network, and its settings are incorrect for the new
environment.
command on the
initialize
if you want to stop the
no
"Choosing a Suitable
267