3Com SUPERSTACK 3 WEBCACHE 3000 User Manual page 255

If you enter primary and secondary NTP server addresses and both are
available, the Webcache automatically uses the most reliable one.
If you entered
I
Enter date [dd/mm/yy]:
Enter a valid date.
The following prompt is displayed:
Enter time: [hour:min:sec]
Enter a valid time.
The date and time are set as soon as you press Return.
17 The following prompt is displayed:
Current System Time is November 19 07:27:33 2001
Do you want to set the System Time? (yes/no) [no]:
Enter if you want to set the system time of the Webcache.
yes
The Webcache is rebooted at the end of the Getting Started command if
you chose to set the system time; for further information, see
the Webcache"
Enter if you do not want to set the current system time of the
no
Webcache.
The following prompt is displayed:
Old password:
18 Enter the current password for the admin user.
The following prompt is displayed:
Enter new password:
If you press Return without entering a password, the password is set to
<no password>.
19 Enter the new password for the admin user.
The following prompt is displayed:
Retype password:
20 Re-enter the new password. A message is displayed informing you that
the password has been successfully changed.
, the following prompt is displayed:
manual
on page 268.
Getting Started 255
"Rebooting