3Com SUPERSTACK 3 WEBCACHE 3000 User Manual page 156

156 C 10: U
HAPTER SING
Setting Up Websense
Enterprise Filtering
on your Webcache
C F
ONTENT ILTERING
select the Universal option. For further information, see the instructions
that accompany the Websense Enterprise software.
Having acquired and installed the Websense Enterprise filtering software
on your server, you can now set up your Webcache for Websense
filtering.
To set up Websense Enterprise filtering using the Web interface:
1 Log in to the Web interface.
2 Click Content Filter on the Toolbar.
3 Select the Setup Filtering wizard in the Navigation Tree.
4 Click Next.
5 Select the Websense Enterprise Filtering mode from the list.
6 Click Next.
7 Enter the IP address and the TCP port number in use by the Websense
Enterprise Server.
8 Select the default rule to be applied to all web requests if the Websense
Enterprise Server is unavailable. Choose Deny All to deny access to all
Web sites or Allow All to allow access to all Web sites.
9 Click Next and then Finish to close the Setup Filtering Wizard.
Editing the Websense Enterprise Filtering Settings
To edit the Websense Enterprise filtering settings:
1 Log in to the Web interface.
2 Click Content Filter on the Toolbar.
3 Select Websense Filtering > Setup Websense in the Navigation Tree.
4 Enter the IP address and the TCP port number in use by the Websense
Enterprise Server.
5 Select the default rule to be applied to all web requests if the Websense
Enterprise Server is unavailable. Choose Deny All to deny access to all
Web sites or Allow All to allow access to all Web sites.
6 Click OK to close the Setup Websense window.
The following sections apply to Websense Enterprise filtering:
"Default Rule"
I
on page 159