3Com SUPERSTACK 3 WEBCACHE 3000 User Manual page 246

246 C 17: S
HAPTER OFTWARE
U
PGRADES
3 Select System > Control > Upgrade Software in the Navigation Tree. The
first screen of the Upgrade Software wizard is displayed. Click Next.
4 You will be informed if an automatic upgrade is available. Click Manual
Upgrade/Downgrade to continue.
5 The Manual Upgrade/Downgrade screen is displayed. In the Webcache
Software Image field, enter the network path and filename of the
software image file which you want to use.
You can click Browse to search for the location of a software image file.
Click Next. The software image file is transferred to the Webcache. This
may take up to one minute, depending on how fast the link is between
the Webcache and the Web browser.
6 The Webcache will verify if the file that you have selected is valid. If it is
not valid, the software upgrade fails.
If the file is valid, the final screen of the wizard is displayed. Carefully read
the summary information, which displays the name, software version and
creation date of the current software image file and the new software
image file that you are upgrading to. Ensure that the software image is
the one that you want to upgrade to. Click Next.
7 The Software License Terms screen is displayed. You must click View
License to view the 3Com End User Software License agreement. You
cannot accept or decline the agreement until you have viewed it.
8 The 3Com End User Software License is displayed. Carefully read it and
click Print if you want to print it out. Click Done to continue.
9 The Software License Terms screen is displayed again. If you accept the
terms of the License, select Accept. Go to
If you do not accept the terms of the License, select Decline. The software
upgrade will be ended.
10 The Save Configuration screen is displayed.
Click Save Configuration if you want to save the system configuration.
3Com recommends that you save your system settings before you
perform a software upgrade. Saving the configuration settings ensures
that you can recover your entire system configuration if you need to
re-install an older software version.
11 The Finish screen is displayed again. Click Next to start the software
upgrade.
step 10.