Clearing The Web Client Blocking List; Filter Exclusions; Setting Up Filter Exclusion Lists; Editing The Filter Exclusion List - 3Com SUPERSTACK 3 WEBCACHE 3000 User Manual

166 C 10: U
HAPTER SING
Clearing the Web
Client Blocking List

Filter Exclusions

Setting Up Filter
Exclusion Lists
Editing the Filter
Exclusion List
C F
ONTENT ILTERING
You can use the Clear List screen to delete all the current entries in the
Web Client Blocking List.
To clear the Web Client Blocking List:
1 Log in to the Web interface.
2 Click Content Filter on the Toolbar.
3 Select Webcache Filtering > Web Client Blocking > Clear List in the
Navigation Tree.
4 Click OK to clear the Web Client Blocking list.
Filter Exclusions allow you to specify and exclude particular client
machines from any content filtering. The Exclusion List can be enabled
when you set up the Webcache for Manual Content Filtering or 3Com
Web Site Filtering. One use of the Filter Exclusion List is to exclude
machines used by network administrators who must be exempt from
content filtering.
If you configure the Webcache to use a Websense Enterprise server for
content filtering then the Filter Exclusion List will be disabled.
To set up Exclusion lists using the Web interface:
1 Log in to the Web interface.
2 Click Content Filter on the Toolbar.
3 Select Webcache Filtering > Filter Exclusion > Setup Filter Exclusion in the
Navigation Tree.
4 Select Enable Filter Exclusion to allow entries to be entered into the Filter
Exclusion List.
You can create a list of the IP addresses or IP address ranges of clients that
you want to exclude from being filtered in the following ways:
Manually entering each IP address in the Filter Exclusion List.
I
Loading an existing list of IP addresses from an external text file in the
I
Load List From File screen.
A combination of the above methods.
I